Overview
For people who have lost most or all of their teeth, or whose remaining teeth are failing, a full-arch implant bridge can be life-changing. Instead of a denture that shifts when you eat or laugh, a fixed row of teeth is screwed onto implants in the jaw and stays put.
Two names come up again and again: All-on-4 and All-on-6. They sound like a simple choice between four implants and six, but the difference is really about bone, bite and long-term load. This guide explains how each works, who each suits, and what to ask before choosing.
What All-on-4 actually is
All-on-4 replaces a full arch of teeth, upper or lower, with a fixed bridge supported by four implants. The concept was developed in the late 1990s to solve a specific problem: patients who had lost their back teeth years earlier often had very little bone left at the back of the jaw. Placing implants there meant bone grafting first, followed by months of waiting.
The solution was to work with the bone that tends to last longest, at the front of the jaw:
Tilting the back implants also spreads the supports further apart, which is what allows a full bridge to sit securely on just four. In many cases, this design avoids the need for bone grafting entirely.
The trade-off: the overhang
Even when tilted, the rearmost implants rarely reach beyond the premolars. That means the last one or two teeth at each end of the bridge extend backwards with no implant underneath. This unsupported section is called a cantilever.
A short cantilever is normal and safe. A long one acts like a lever: chewing forces on those end teeth concentrate on the last implant and its screw. Over time, an overly long cantilever is a common reason for loose screws and cracked bridges. A careful plan keeps the overhang short, even if that means one fewer back tooth.
What All-on-6 changes
All-on-6 uses six implants instead of four. The extra implants usually sit further back in the jaw, which:
- Spreads chewing forces across more supports
- Reduces or eliminates the cantilever
- Gives the bridge more margin if one implant ever has a problem
The catch is that All-on-6 needs enough bone further back to hold those extra implants. If that bone has already been lost, six implants may only be possible after grafting.
Which option suits whom?
All-on-4 is often the better choice when:
- Bone at the back of the jaw has resorbed and grafting would add months to treatment
- Surgery needs to be kept as short as possible for medical reasons
- Bite forces are normal
All-on-6 is often recommended when:
- There is enough bone at the back to support extra implants
- You have a heavy bite or a wide jaw
- You grind or clench your teeth at night
In very advanced bone loss, where even the front of the upper jaw has resorbed, neither may be possible without additional procedures, and zygomatic implants anchored in the cheekbone may be discussed.
The key point: the choice should come from your CBCT scan and bite analysis, not from which option has the lower headline price. A good clinic will tell you if your jaw would carry six, even if four is cheaper.
What full-arch implants cost
Full-arch treatment is one of the most expensive procedures in dentistry, and prices vary enormously between countries. Typical prices for All-on-4 on one arch
| Country | Typical price per arch |
|---|---|
| United Kingdom | €16,500 – €25,500 |
| Germany | €13,800 – €22,000 |
| United States | €20,000 – €32,000 |
| Turkey (Istanbul) | From around €3,250 |
This difference is why many patients travel. Prices for All-on-4 dental implants in Turkey start from around €3,250 per arch with a Swiss implant system at Natural Clinic in Istanbul, rising to around €5,400 with Straumann. Treating both arches doubles the package. All-on-6 costs more because it uses two additional implants.
What moves the price within any country:
- Implant brand: the same four implants can cost very different amounts depending on the manufacturer.
- One arch or two.
- Extractions: how many remaining teeth need removing on the day.
- The final bridge material: zirconia is stronger and more stain-resistant than acrylic, and priced accordingly.
- Extras: multi-unit abutments, sedation and a night guard may be itemised separately.
When comparing quotes, check that each one names the implant system and includes both the temporary bridge and the final bridge.
How treatment usually unfolds
Full-arch implant treatment normally takes two visits, spaced three to six months apart.
Visit one: extractions, implants and temporary teeth. Failing teeth are removed and the implants placed in the same session. Where the implants are stable enough, a fixed temporary bridge, usually made of acrylic, is attached on the day of surgery or within a few days. Patients do not leave without teeth.
The healing period. Over the next three to six months, the implants fuse with the bone and the gums finish reshaping after extractions. The temporary bridge is for soft foods during this time. It is also a trial: how your lips sit, how you speak and how you bite all feed into the design of the final bridge.
Visit two: the permanent bridge. Once healing is confirmed, the final bridge is made, typically milled from a single block of zirconia, then fitted and the bite adjusted.
Most people describe the surgery as less painful than they expected but are surprised by the swelling, which usually settles over about a week.
Living with a full-arch bridge
- Cleaning: brush carefully around and under the bridge every day. Water flossers and interdental brushes help reach the gap between bridge and gum.
- Check-ups: because the bridge is screwed in rather than cemented, a dentist can remove it periodically to inspect and clean the implants and gums underneath.
- Night guard: zirconia is very hard and absorbs little force. If you grind your teeth, a night guard protects the implants and screws.
- Records: keep a note of the implant system and screw type. Any future dentist will need this information to remove or repair the bridge safely.
Questions to ask before choosing
- Based on my CBCT scan, would my jaw support six implants instead of four?
- How long will the cantilever be at each end of the bridge?
- Which implant system will you use, and is it named in writing?
- Does the price include the temporary bridge, the final zirconia bridge and extractions?
- Will I leave with fixed teeth after the first visit?
- What does the guarantee cover, and what follow-up is included between visits?
The bottom line
All-on-4 and All-on-6 are both proven ways to replace a full arch of teeth with a fixed bridge. All-on-4 shines where bone at the back of the jaw is limited and grafting would add months. All-on-6 offers extra support where the bone allows. The right answer comes from your scan, your bite and an honest conversation with a clinician who is willing to tell you when four is not enough.







